Pride Mobility Mobility Aid INFINFB2804 User Manual

PRODUCT SPECIFICATIONS SHEET  
Model: Jazzy Elite 6  
Manufacturer: Pride Mobility Products Corp.  
Document Information: INFINFB2804/Rev B/October 2012  
Weight Capacity:  
Maximum Speed:  
300 lbs. (136 kg)  
1
Up to 3.7 mph (6 km/h)  
2
2.5 in. (6.35 cm) at battery box  
1.875 in. (4.76 cm) at caster arm spring  
Ground Clearance:  
2
25 in. (63.5 cm)  
Turning Radius:  
2, 6  
Length: 41.5 in. (105.4 cm) with front riggings  
36.5 in. (92.7 cm) without front riggings  
Width: 23.25 in. (59 cm)  
Overall Size:  
Drive Wheels:  
Caster Wheels:  
9 in. (22.86 cm), solid  
Rear: 6 in. (15.24 cm), solid  
Front: 5 in. (12.7 cm), solid  
Suspension:  
Limited  
1, 4  
Up to 12.04 miles (19.37 km)  
Range:  
5
Base: 79 lbs. (35.8 kg)  
Component Weights:  
Standard Seat and Controller: 52.5 lbs. (23.8 kg)  
Batteries: 21 lbs. (9.5 kg) each  
Drivetrain:  
Brakes:  
Two motor, front-wheel drive  
“Intelligent Braking” electronic regenerative, disc park brake  
Two 12-volt, U-1 batteries  
3
Batteries:  
Battery Charger:  
3.5-amp, off-board  
6° (10.5%)  
Maximum Allowable Incline:  
Maximum Angle Capacity:  
10° (17.6%)  
Maximum Obstacle Climbing Ability: 2 in. (5 cm)  
1
2
Varies with base model, user weight, terrain type, battery amp hour rating (Ah), battery charge, battery condition, motors,  
controller type, tire type, and tire condition. This specification can be subject to a variance of +10%, -5%.  
Due to manufacturing tolerances and continued product improvement, this specification can be subject to variance of  
(+ or -) 3%.  
3
4
AGM or Gel-Cell type required. See VI. “Batteries and Charging.”  
Tested in accordance with ANSI/RESNA WC Vol 2, Section 4 and ISO 7176-4 Standards. Results derived from  
theoretical calculation based on battery specifications and drive system performance. Test conducted at maximum  
weight capacity.  
5
6
Battery weight may vary based on manufacturer.  
Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections.  
NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176 series EN12184  
standards. All specifications subject to change without notice.  
*I NFI NFB2804*  
 

Perception Digital MP3 Player PD 200 User Manual
Philips Cassette Player AZ122 User Manual
Philips CRT Television 13PR19C User Manual
Philips Laptop 13NB5603 User Manual
Philips Portable CD Player AX3217 17B User Manual
Philips Switch CBTD3306 User Manual
Pioneer Stereo System DRM 1004V40 User Manual
Polk Audio Speaker AMR130 User Manual
Professional Series Fan PS77611 User Manual
PYLE Audio Car Stereo System PLMRKT34 User Manual